Materials

The application fields of the cutting system by RG Technologies are extremely versatile. The various materials that are required for the production can all be processed on one cutting table.

 

Due to the modular installation of the tools the conversion of the cutting table for a new material is very fast and straightforward, and can be completed in a few simple steps.

The combination of module, tool, knife and cutting setting is always the one that is optimally adapted to the material to be processed.


Leder Fransen

Leather with Fringes

Leder

Leather with Different Material Thicknesses

Technische Textilien

Technical Textiles

Kevlar und Gore-Tex

Kevlar und Gore-Tex


Tools

Through the usage of various tools, processing of a number of different operations from marking and perforating up to the actual cutting is possible without standstill. A selection of tools used in the cutting system by RG Technologies can be found in the area components.

Knives

The knives are equipped with different geometries which are optimized for each type of material on the basis of long lasting expert knowledge. The variety ranges from very sharp filigree knives with minimum pre-cut for cutting small radiuses, up to robust knives with post-cut and extra-long endurance. Basically, the knife types are divided into the following groups: Drag knives, oscillating knives, rotary knives and v-cut knives. Please contact us we will be happy to answer questions about the optimal knife types for your materials.

 

For perforations there are - beside a pin which is mainly used for markings - several punching tools available with a radius up to 5,5 mm. Larger radiuses can be cut unproblematic and without loss of accuracy by knives.

Material Overview

 In the following you will find a list of materials and their suitable tools. This is just an excerpt of possible material-tool-combinations. The knives in particular are not listed because their selection is highly dependent on the geometry to be cut. If you have any questions, please contact us. We are happy to work with you to find the optimal solution for your materials in our cutting center. 

Leather

Material: Upper Leather, Saddle Leather, Nature Leather, Sole Materials

 

Textiles

Material: Felt, Pattern Material, Nonwovens, Synthetics, Glass Fibre, Aramid Fibre, Carbon Fibre, Kevlar

 

Carton

Material: Carton, Passepartout Carton, Model Carton, Wool Pulp Carton, Gray Board

 

Paper

 

Foam

Material: Styrofoam, Polyurethane, Expanded Polysterene, Soft Foam Boards

 

Vinyls

Material: Decorative Foil, Reflective Foil, PET Foil, Translucent Foil, Teflon Foil

 

Twin-Wall Sheet

Material: Honeycomb Sheets, Honeycomb Cardboards, Sandwich Boards

 

Rubber

Material: Silicone, Natural Rubber, Solid Rubber, Latex Foil, Foam, Rubber

 

Synthetic Materials

Material: Polycarbonate, Polypropylene, Thermoplastic Boards, Acrylic

 

Wood and Composite Material

Material:  Veneer, MDF-Boards, Inlay, Laminated Fibre, Press Board